Steel Spinning Machine Steel Cylinder Hot Making Hydraulic Spinning Necking-in Machine
Product Description
•HFD180 Hot-Spinning Machine including: Intermediate Frequency Heating Equipment, Thermal-Spinning Forming Machine, Bottom Pushing Machine, etc. Total power for Complete Equipment is about 200Kw, installation area is 13000 x 8000mm, specific parameter as following:
Product Parameters
Intermediate Frequency Heating Equipment Model D180-110Kw
A.Main Technical Parameter:
| Rated Power(Kw) |
Rated Frequency(Hz) |
Power Frequency Voltage(V) |
| 110 |
2500 |
3-380V |
B.Equipment Performance and Technical Requirement:
| Rated Power(Kw) |
Max Power(Kw) |
Rated Frequency(Hz) |
Power Frequency Voltage(V) |
Output Voltage(V) |
Matching Transformer(KVA) |
| 110 |
250 |
2500 |
3N-380 |
750 |
200 |
A.Parameters for Cylinder
1-1, Cylinder Material: 34CrMo4 (35 CrMo),37Mn,30 CrMo,45#
1-2, Specification of Cylinder:
a.Diameter:φ89-180mm
b.Length: 400--1050mm
c.Thickness: 5--12mm
d.Weight: <80kg
B. Performance for Hot Spinning Machine
2.1, Production rate: <80s/bottle(including the time of input and output material)
2.2, Equipment total power: around 60KW
Main motor: 30KW--6P
2.3, Flap rotation torque: 20KN.m
2.4, Hydraulic system nominal operating pressure:5--8Mpa (Low pressure), 6-15Mpa (High pressure)
2.5, Speed of Mainshaft: 400~450 R/M
2.6, Two optional types for auxiliary heating: Automatic or Manual
C. Structure of Hot Spinning Machine
3.1, Hot spinning machine main engine includes main engine chassis, main shaft, jack catch clamping device, grip cylinder, oil dispenser.
3.2, Panel turnover mechanism includes turning plate, turning plate oil cylinder, turning plate bearing(single-boom) and adjusting mechanism, turning plate centre lower than 20mm of main shaft centre, cushion block.
3.3, Equipment includes feeding mechanism, discharge mechanism, air cylinder, removable and adjustable feed frame.
3.4, Steel pipe positioning mode: prelocalization
3.5, Hydraulic system includes high-low pressure pump, control valve and connecting pipeline.
3.6, One set electric control cabinet, one set electric control box.
3.7, Two types for Mould lifting device: Automatic or Manual
D100 Bottom Pushing Machine
A.Parameter for cylinder:
1.1, Material for cylinder: 34CrMo4 (35 CrMo), 37Mn, 30 CrMo,45#
1.2, Specification of cylinder:
a.Diameter:φ108-180mm
b.Length: 400--1050mm
c.Thickness: 5--12mm
d.Weight: <80kg
B. Performance for Bottom Pushing Machine
2.1, Production rate: <80s/bottle(including the time of input and output material)
2.2, Equipment total power: around 30KW
C. Structure of Bottom Pushing Machine
3.1, Bottom Pushing Machine consists of main engine, hydraulic system, feeding and discharging mechanism.
3.2, Two types for Bottom Pushing Device: Automatic or Manual
3.3, A set of Deslagging Device
CNC Roller type Spinning Machine
Processing Diameter: 406~920mm
| Machine Model |
THG622 |
THG660 |
THG720 |
THG920 |
| Processing Diamater |
406-622mm |
406-660mm |
559-720mm |
559-920mm |
| Processing Length |
5500-12500mm |
5500-12500mm |
5500-12500mm |
5500-12500mm |
| Processing Thickness |
10-30mm |
10-30mm |
10-30mm |
10-30mm |
| Ctentral Heigh |
1300mm |
1300mm |
1300mm |
1300mm |
| Main Engine Power |
200Kw |
250Kw |
280Kw |
355Kw |
| Rolling Wheel Swing Angle |
90 degree |
90 degree |
90 degree |
90 degree |
| Control Methods |
CNC |
CNC |
CNC |
CNC |
| Machine Dimension L*W*H |
23000*3200*2300mm |
23000*3200*2300mm |
31000*3200*2500mm |
31000*3200*3300mm |
CNC Roller type Spinning Machine
Processing Diameter: 219~406mm
| Machine Model |
THG325 |
THG406-IV |
| Processing Diamater |
219-325mm |
325mm-406mm |
| Processing Length |
800-2000mm |
800-2000mm |
| Processing Thickness |
5-15mm |
5-18mm |
| Central Height |
1100mm |
1200mm |
| Main Engine Power |
90Kw |
144Kw |
| Rolling Wheel Swing Angle |
100 degree |
100 degree |
| Spindle Speed |
700rpm |
700rpm |
| Control Methods |
CNC |
CNC |
| Machine Dimension L*W*H |
16000*2000*1420mm |
18000*2000*1600mm |
Template type Spinning Machine
Processing Diameter: 200~406mm
| Machine Model |
THM232 |
THM325 |
THM406 |
| Processing Diamater |
200-232mm |
219-325mm |
325-406mm |
| Processing Length |
700-1700mm |
800-2000mm |
800-2000mm |
| Processing Thickness |
3-15mm |
5-15mm |
5-18mm |
| Central Height |
1000mm |
1100mm |
1200mm |
| Main Engine Power |
37Kw |
90Kw |
110Kw |
| Template Retroflexion Angle |
90 degree |
90 degree |
90 degree |
| Template Center Height Adjust |
+-20mm |
+-30mm |
+-30mm |
| Control Method |
PLC |
PLC |
PLC |
| Machine Dimension L*W*H |
16000*2000*1300mm |
16000*2000*1420mm |
18000*2000*1600mm |
Double Roller Series CNC Playback General Spinning Flow Forming Machine
Processing Diameter: 690~3000mm
| Model |
Max Rough Diamater(mm) |
Height from Spindle to Tailstock(mm) |
Longitudinal Thrust(KN) |
Radial Trust(KN) |
| 350PCNC |
690 |
1100 |
24 |
24 |
| 450PCNC |
890 |
1250 |
65 |
65 |
| 800PCNC |
1590 |
1250 |
65 |
65 |
| 700PCNC |
1400 |
2300 |
150 |
150 |
| 900PCNC |
1800 |
2500 |
200 |
200 |
| 1200PCNC |
2400 |
2500 |
300 |
300 |
| 1500PCNC |
3000 |
3500 |
400 |
400 |
Triple Roller Type CNC Power Spinning Flow Forming Machine
| Name |
Unit |
QX63-10CNC |
QX63-20CNC |
QX63-30CNC |
| Max Rough Diameter |
mm |
400 |
600 |
700 |
| Min Rough Diameter |
mm |
60 |
60 |
100 |
| Max length of work piece(positive rotation) |
mm |
1200 |
2000 |
2500 |
| Max length of work piece(contrarotation) |
mm |
2200 |
3000 |
4000 |
| Double center distance |
mm |
4700 |
6000 |
6500 |
| Spindle Speed |
rpm |
30-600 |
30-600 |
30-500 |
| Main engine power |
Kw |
37/40 |
100/110 |
120 |
| Tail force |
KN |
50 |
75 |
150 |
| Spinning roller base longitudinal stroke |
mm |
1500 |
2000/2500 |
2500/3000 |
| Spinning roller base longitudinal thrust |
KN |
170 |
250/300 |
400/450 |
| Spinning roller base horizontal stroke |
mm |
170 |
270 |
300 |
| Spinning roller base horizontal thrust |
KN |
3*100 |
3*200 |
3*300 |
Concave Bottom Stamping Machine
| Machine Model |
250CD |
400CD |
500CD |
| Forming Force |
2500KN |
4000KN |
5000KN |
| Processing Diameter |
219-232mm |
219-406mm |
219-406mm |
| Processing Length |
1700mm |
2000mm |
2000mm |
| Processing Thickness |
18mm |
18mm |
18mm |
| Central Height |
650mm |
800mm |
800mm |
| Control Methods |
PLC |
PLC |
PLC |
Detailed Photos
Installation Instructions
Related Products
Cylinder embossing machine CNC threaded screw machine Filament winding machine
FAQ
Q: How can we guarantee quality?
A: Always a pre-production sample before mass production; Always final Inspection before shipment;
Q: What can you buy from us?
A: All the machine for the CNG cylinder production line.
Q: Why should you buy from us not from other suppliers?
A: Wuxi Longterm Group is group corporation which are professional supplier of cable, LPG gas cylinder, steel drum, LNG and CNG
machinery with more than 25 years of experience and a strong professional R & D team
Q: What services can we provide?
A: Online technical support, On-site installation, Spare parts...
We need to know the following information to make the quotation to you:
1. The technical drawing of the cylinder.
2. Daily capacity.
Audited Supplier 
){kind=link}
){kind=link}