Copper Wire PVC Cable Extrusion and Wire Insulation Machine~

• Customization: Available
• Driven Type: Electric
• Condition: New
• Model NO.: WLT
• Warranty: 12 Months
• Screw: Single-Screw
• Product Name: High-Performance Electric Utility Wire and Cable E
• Working Temperature: 0-45degrees
• Power: Three-Phase 380 Plus or Minus 10%
• Application: Extruder Compound of PVC, PE, Lshf
• Nitrogen Depth: 0.5~0.7mm
• Screw & Barrel Surface: Nitrogen Treated
• Oversea Installation: Available
• Transport Package: Standard Seaworthy Package
• Trademark: HLT
• Origin: China, Jiangsu
• HS Code: 84772090
• Production Capacity: 500/Year

Product Description

Copper Wire PVC Cable Extrusion and Wire Insulation Machine~

Introduction

The unit is used for copper core insulation coating of middle and small section production,
mainly for the soft polyviny chloride(PVC), polyethylene and other thermoplastics
 

 

Main Equipments

Take up machine
 

Model	XLM2500/4500	XLM3200/5000
Cable OD(mm)	φ30~φ80	φ40~φ200
Reel Diameter(mm)	φ2500~4500	φ3200~5000
Reel Width(mm)	1900~2500	2300~2800
Max Speed(m/min)	40	30
Load capacity (ton)	60	80

Traction
 

TQD-4000KG Pneumatic Caterpillar	1set
l  Max. traction force	4000kg
l  Max. diameter of cable	200mm (max)
l  Traction speed	20m/min
l  Gripping length of caterpillar belt	2900mm
l  Width of caterpillar belt	180mm
l  Driving motor	Z4-132-4/1- 18.5Kw, 1500rpm
l  Number of pairs of cylinder	9 pairs
l  Center height of machine	1000mm
l  Direction of the machine	R - L
l  The bearings of main parts	Chinese high quality brand: NSK

150 Extrusion machine
 

The screw diameter	150mm
The screw length to diameter ratio	25:01:00
After sheath outside diameter	φ35~140mm
Maximum traction	2500kg
The production line speed	>40m/min
Steel specification	PN1600-PN3150
The line plate specification	PN1600-PN3150
Equipment center high	1000mm
Production line direction	In the face of the nose left put right
LF1600/3150 gantry rail walking type of passive motorized	1 sets of
TQD-2000kg crawler type pneumatic tractor traction before	1 sets of
SJ-150X25 plastic extruder	1 sets of
Automaic drying feeding device	1 sets of
φ140 square sheathed the nose	1 only
24 m stainless steel water trough(including 4 meters mobile sink)	1 sets of
Cable blow dry device	1 set
TQD-2500kg crawler type pneumatic tractor traction after	1 set
LSP1600 /walk type 3150 gantry rail line frame	1 sets of
Electrical synchronization control system	1 sets of

 

Our Workshop






Our Clients





Package




Our Team




RFQ
 

1,Q: What is your main brand for the electrical and mechanical parts?

A: China famous brand

2, Q:could we appoint the parts brand? 

A: Yes, ABB, SIEMENS, Danfoss, or theirs that you like.

3, Q: could you please arrange the installation and commissioning ?

A: Yes , we could and the buyer pay the charge

4, Q: could you arrange the production education?

A: Yes , we could and the buyer pay the charge

5, Q: could you do the design for the whole plant

A: Yes , we can.

6, Q: could you offer the production process design

A: Yes , we can.

7, Q: what is the difference with other supplier?

A: what we could offer to other customer is not only the machine itself, also we could offer: factory design, production process design , QC control and education and assist machine and raw material offering .

8.Q:What's the payment terms?

A:T/T,30% deposit and 70% balance before delivery.

9, Q:How long the guarantee:

A: one year and charge for repair the whole life.

 

Enable us to give you a better quotation, please kindly provide the parameter below:

1.  Coil diameter (we need to know the take up and pay off machine size)?

2.  Extrusion speed?

3.  Extrusion thickness?

4. What is material of outer sheath.(PVC or PE or HDPE or MDPE or TPU?