| Customization: | Available |
|---|---|
| After-sales Service: | After-Sales |
| Warranty: | 12 |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Printing color | 1 color |
| Single cycle | can |
| Continuous exercise | can |
| Item count | can be |
| The speed | can be adjusted (0 ~ 9 adjustable) |
| The time delay of each part | can be adjusted (0 ~ 9 adjustable) |
| Printing speed | 1200 times/hour |
| Maximum screen frame | 550mmX900mm |
| The maximum printing area | Φ190 mm full circle or 400X600mm |
| The up and down travel of the workbench | 200 mm |
| Left and right travel of the scraper | 600mm |
| The up and down stroke of scraper and oil scraper | 25mm |
| Pneumatic | drive |
| Control system | microcomputer |
| Control voltage | 12VDC |
| Power supply voltage | 220VAC / 1 phase |
| Connect the load to | 20W |
| Pneumatic supply | 6bar |
| Air consumption/cycle | 2.1 L |
| The overall size of the fuselage | 780mm X 960 mm X 1580 mm |
| Weight | 240 K g |
Hydro testing Equipment
1.Process flow chart
Cylinder body of fire extinguisher → Putting in clamp,12 station one time → Compress workpiece→ Start → Auto water intake drainage→ exhaust finished,Automatic Hi-pot test → pressure maintaining to test the leakage → Finished,Air intake and drainage, After the drainage, Loosen workpiece → Take down workpiece→Followed by recycling
2.Equipment Parameter
| No | Item | Basic parameter(mm) |
| 1 | Max diameter of pressure test | 200 |
| 2 | Min diameter of pressure test | 90(M30*1.5) |
| 3 | Max workpiece length of pressure test | 650 |
| 4 | Testing efficiency | 1000pcs/ 8hours |
| 5 | Rated input voltage | AC380V Three phase |
| 6 | Frequency | 50HZ |
| 7 | Power | 5KW |
Powder Coating Production Line&Dry Powder Filling Production Line
Introduction
This is a set of duplex developed by our company for the dry powder filling of fire extinguishers.
Filling machine, conveying line, punching, intubating, tightening and inflating one dry powder filling automatic production line,it is a new filling concept. The entire production line requires only three people to operate and can complete 300 cylinders per hour.
1.Technological Process
Put on the workpiece →Start → Compress,Vacuum filling→Filling finished, another workpiece filling→Filling finished, Loosen the workpiece,take down workpiece →Followed By Recycling
2.Filling Amount Deviation Requirement
Complete the one-time continuous punching and charging, andFilling Amount Deviation meets the standard requirements:
1-3 kg: ± 3%.
3 kg: ± 2%
Our Company
Wuxi Longterm Machinery Technologies Co., Ltd. has been engaged in research of welding technology for more than 35 years, we have strong technical strength, rich experience, and mature team. Our machines have been exported to Europe, Asia, and American with good quality and fame. Our company is specialized in designing and producing complete sets of Auto Welding Equipment(TIG, MAG, MIG, PAW), Auto welding system integrations, and related equipment. Widely used in lines of the aerospace industry, chemical industry, mechanical industry, pressure vessel making, water heater making, and stainless steel products. We are developing and innovating new generation complete sets of welding system, we try our best to meet customers' requirements. We warmly welcome you to visit our factory!
Enable us provide the most suitable proposal for you,please tell me following details:
1.Technical Drawing of the Fire Extinguisher you want to make?
2.What size of Fire Extinguisher you want to produce?
3.What diameter and thickness of the cylinder you want to make?
4.Are you new in this area or you already have some machines in the workshop?
5.Capacity you require, i.e. how many pieces and sizes you want to make per day?
){kind=link}